|  | Topic : Mustang seat and no air induction channels Tune question |  |
| | | edmontonstorm | | Jupiter |  |  | | Reg. Date | : | 12/09/2014 | | Posts | : | 1,054 | | Location | : | Alberta, Canada |
|
| | Posted : 28 Apr 2015 - 17:33 Post title : Mustang seat and no air induction channels Tune question | | | The TOR tune which i have is designed i assume with a high flow filter but also the OEM seat with the induction tubes for intake. I put the mustang seat on and as you know they do not have the channels, i also removed the top seal ring on the box, figured there was no need for it. But now i am wondering if the bike is running a bit lean. Anyone have thoughts on this? It must be taking in more air than with the channels.
| Gloss Black 2013 Storm ABS - K&N (seal removed) - Mustang Seat - Hogslayer pipes - PCV-AT300
|
|
| | | GerPa | | Jupiter | |  | | Reg. Date | : | 10/12/2011 | | Posts | : | 1,919 | | Location | : | Mackay, Central Queensland, Australia |
|
| | Posted : 28 Apr 2015 - 20:03 Post title : Re: Mustang seat and no air induction channels Tune question (Re: edmontonstorm) | | | Mine is 1600 with the Sports Hi Flow Filter, Short TORS & Tune + Mustang Single seat and I have NOT seen any change in fuel usage, On the Open Road it consistently does 5.5 to 5.6 Ltrs/100. Besides a vastly improved arse I have not noticed any difference in the performance.
|  May-2011-1600, 20306 Tune, Mustang Vintage Solo Seat, Meerkat Cat Bypass, + Meerkat Modified Short TORS   ,K&N Air Cleaner,K&N Oil Filter, JBQ lifting system, Gold Plug Magnetic Sump Plug,Dart Fly screen, Rivco Risers, GiPro Gear Indicator, Breakaway Cruise Control, Avon ISO Grips, Scorpion Western Low Handlebars, Kury Switchblade Pegs, Garmin Zumo390LM,Michelin RC2 on Front RC 3 on ,Modified Rear Drive Pulley Hub Bearings (Mat1600/Alex4 Modification) Front Susp: Std & 7.5W Oil /126mm Air Gap & Rear:Hagon Nitro's with 26Kg/cm Springs + Lots of other "Bling" stuff.
|
|
| | | PapaSmurfMC | | Chaac | |  | | Reg. Date | : | 03/10/2013 | | Posts | : | 871 | | Location | : | Philadelphia, Pennsylvania, United States |
|
| | Posted : 29 Apr 2015 - 03:58 Post title : Re: Mustang seat and no air induction channels Tune question (Re: edmontonstorm) | | | I'm running TORs with a K&N filter (and also removed the top gasket) and have the Mustang Vintage seat. With the TORs tune, runs great. If you're concerned about running lean, pull the plugs and check but I haven't felt the need with this combination.
| 2013 Blue Marble Haze Thunderbird 1600 ABS
2009 Black Bonneville A1 ("Mag")
Buncha farkles
| | Post edited by PapaSmurfMC on 29 Apr 2015 - 03:58 |
|
|
| |
| |
|